Interface CPSubsystem


public interface CPSubsystem
CP Subsystem is a component of Hazelcast that builds a strongly consistent layer for a set of distributed data structures. Its APIs can be used for implementing distributed coordination use cases, such as leader election, distributed locking, synchronization, and metadata management. It is accessed via HazelcastInstance.getCPSubsystem(). Its data structures are CP with respect to the CAP principle, i.e., they always maintain linearizability and prefer consistency over availability during network partitions. Besides network partitions, CP Subsystem withstands server and client failures.

Currently, CP Subsystem contains only the implementations of Hazelcast's concurrency APIs. Since these APIs do not maintain large states, all members of a Hazelcast cluster do not necessarily take part in CP Subsystem. The number of Hazelcast members that takes part in CP Subsystem is specified with CPSubsystemConfig.setCPMemberCount(int). Say that it is configured as N. Then, when a Hazelcast cluster starts, the first N members form CP Subsystem. These members are called CPMembers, and they can also contain data for other regular -AP- Hazelcast data structures, such as IMap, ISet.

Data structures in CP Subsystem run in CPGroups. Each CP group elects its own Raft leader and runs the Raft consensus algorithm independently. CP Subsystem runs 2 CP groups by default. The first one is the METADATA CP group which is an internal CP group responsible for managing CP members and CP groups. It is initialized during cluster startup if CP Subsystem is enabled via CPSubsystemConfig.setCPMemberCount(int). The second CP group is the DEFAULT CP group, whose name is given in CPGroup.DEFAULT_GROUP_NAME. If a group name is not specified while creating a CP data structure proxy, that data structure is mapped to the DEFAULT CP group. For instance, when a CP IAtomicLong instance is created via .getAtomicLong("myAtomicLong"), it is initialized on the DEFAULT CP group. Besides these 2 pre-defined CP groups, custom CP groups can be created at run-time while fetching CP data structure proxies. For instance, if a CP IAtomicLong is created by calling .getAtomicLong("myAtomicLong@myGroup"), first a new CP group is created with the name "myGroup" and then "myAtomicLong" is initialized on this custom CP group.

This design implies that each CP member can participate to more than one CP group. CP Subsystem runs a periodic background task to ensure that each CP member performs the Raft leadership role for roughly equal number of CP groups. For instance, if there are 3 CP members and 3 CP groups, each CP member becomes Raft leader for only 1 CP group. If one more CP group is created, then one of the CP members gets the Raft leader role for 2 CP groups. This is done because Raft is a leader-based consensus algorithm. A Raft leader node becomes responsible for handling incoming requests from callers and replicating them to follower nodes. If a CP member gets the Raft leadership role for too many CP groups compared to other CP members, it can turn into a bottleneck.

CP member count of CP groups are specified via CPSubsystemConfig.setGroupSize(int). Please note that this configuration does not have to be same with the CP member count. Namely, number of CP members in CP Subsystem can be larger than the configured CP group size. CP groups usually consist of an odd number of CP members between 3 and 7. Operations are committed & executed only after they are successfully replicated to the majority of CP members in a CP group. An odd number of CP members is more advantageous to an even number because of the quorum or majority calculations. For a CP group of N members, majority is calculated as N / 2 + 1. For instance, in a CP group of 5 CP members, operations are committed when they are replicated to at least 3 CP members. This CP group can tolerate failure of 2 CP members and remain available. However, if we run a CP group with 6 CP members, it can still tolerate failure of 2 CP members because majority of 6 is 4. Therefore, it does not improve the degree of fault tolerance compared to 5 CP members.

CP Subsystem achieves horizontal scalability thanks to all of the aforementioned CP group management capabilities. You can scale out the throughput and memory capacity by distributing your CP data structures to multiple CP groups (i.e., manual partitioning / sharding) and distributing those CP groups over CP members (i.e., choosing a CP group size that is smaller than the CP member count configuration). Nevertheless, the current set of CP data structures have quite low memory overheads. Moreover, related to the Raft consensus algorithm, each CP group makes use of internal heartbeat RPCs to maintain authority of the Raft leader and help lagging CP group members to make progress. Last, the new CP lock and semaphore implementations rely on a brand new session mechanism. In a nutshell, a Hazelcast server or a client starts a new session on the corresponding CP group when it makes its very first lock or semaphore acquire request, and then periodically commits session heartbeats to this CP group in order to indicate its liveliness. It means that if CP locks and semaphores are distributed to multiple CP groups, there will be a session management overhead on each CP group. Please see CPSession for more details. For these reasons, we recommend developers to use a minimal number of CP groups. For most use cases, the DEFAULT CP group should be sufficient to maintain all CP data structure instances. Custom CP groups is recommended only when you benchmark your deployment and decide that performance of the DEFAULT CP group is not sufficient for your workload.

CP Subsystem runs a discovery process on cluster startup. When CP Subsystem is enabled by setting a positive value to CPSubsystemConfig.setCPMemberCount(int), say N, the first N members in the Hazelcast cluster member list initiate this discovery process. Other Hazelcast members skip this step. The CP discovery process runs out of the box on top of Hazelcast's cluster member list without requiring any custom configuration for different environments. It is completed when each one of the first N Hazelcast members initializes its local CP member list and commits it to the METADATA CP group. A soon-to-be CP member terminates itself if any of the following conditions occur before the CP discovery process is completed:

  • Any Hazelcast member leaves the cluster,
  • The local Hazelcast member commits a CP member list which is different from other members' committed CP member lists,
  • The local Hazelcast member fails to commit its discovered CP member list for any reason.

The CP data structure proxies differ from the other Hazelcast data structure proxies in two aspects. First, an internal commit is performed on the METADATA CP group every time you fetch a proxy from this interface. Hence, callers should cache returned proxy objects. Second, if you call DistributedObject.destroy() on a CP data structure proxy, that data structure is terminated on the underlying CP group and cannot be reinitialized until the CP group is force-destroyed via CPSubsystemManagementService.forceDestroyCPGroup(String). For this reason, please make sure that you are completely done with a CP data structure before destroying its proxy.

By default, CP Subsystem works only in memory without persisting any state to disk. It means that a crashed CP member is not able to join to the cluster back by restoring its previous state. Therefore, crashed CP members create a danger for gradually losing majority of CP groups and eventually cause the total loss of availability of CP Subsystem. To prevent such situations, crashed CP members can be removed from CP Subsystem and replaced in CP groups with other available CP members. This flexibility provides a good degree of fault-tolerance at run-time. Please see CPSubsystemConfig and CPSubsystemManagementService for more details.

CP Subsystem offers disk persistence as well. When it is enabled via CPSubsystemConfig.setPersistenceEnabled(boolean), CP members persist their local state to stable storage and can restore their state after crashes. This capability significantly improves the overall reliability of CP Subsystem by enabling recovery of crashed CP members. When you restart crashed CP members, they restore their local state and resume working as if they have never crashed. If you cannot restart a CP member on the same machine, you can move its data to another machine and restart it with a new address. CP Subsystem Persistence enables you to handle single or multiple CP member crashes, or even whole cluster crashes and guarantee that committed operations are not lost after recovery. In other words, CP member crashes and restarts do not create any consistency problem. As long as majority of CP members are available after recovery, CP Subsystem remains operational.

When CP Subsystem Persistence is enabled, all Hazelcast cluster members create a sub-directory under the base persistence directory which is specified via CPSubsystemConfig.getBaseDir(). This means that AP Hazelcast members, which are the ones not marked as CP members during the CP discovery process, create their persistence directories as well. Those members persist only the information that they are not CP members. This is done because when a Hazelcast member starts with CP Subsystem Persistence enabled, it checks if there is a CP persistence directory belonging to itself. If it founds one, it skips the CP discovery process and initializes its CP member identity from the persisted data. If it was an AP member before shutdown or crash, it restores this information and starts as an AP member. Otherwise, it could think that the CP discovery process has not been executed and trigger it, which would break CP Subsystem.

In light of this information, If you have both CP and AP members in your cluster when CP Subsystem Persistence is enabled, and if you want to perform a cluster-wide restart, you need to ensure that AP members are also restarted with their CP persistence directories.

There is a significant behavioral difference during CP member shutdown when CP Subsystem Persistence is enabled and disabled. When disabled (the default mode in which CP Subsystem works only in memory), a shutting down CP member is replaced with other available CP members in all of its CP groups in order not to decrease or more importantly not to lose majorities of CP groups. It is because CP members keep their local state only in memory when CP Subsystem Persistence is disabled, hence a shut-down CP member cannot join back with its CP identity and state, hence it is better to remove it from CP Subsystem to not to harm availability of CP groups. If there is no other available CP member to replace a shutting down CP member in a CP group, that CP group's size is reduced by 1 and its majority value is recalculated. On the other hand, when CP Subsystem Persistence is enabled, a shut-down CP member can come back by restoring its CP state. Therefore, it is not automatically removed from CP Subsystem when CP Subsystem Persistence is enabled. It is up to the user to remove shut-down CP members via CPSubsystemManagementService.removeCPMember(UUID) )} if they will not come back.

In summary, CP member shutdown behaviour is as follows:

  • When CP Subsystem Persistence is disabled (the default mode), shut-down CP members are removed from CP Subsystem and CP group majority values are recalculated.
  • When CP Subsystem Persistence is enabled, shut-down CP members are still kept as part of CP Subsystem so they will be part of CP group majority calculations.

Moreover, there is a subtle point about concurrent shutdown of CP members when CP Subsystem Persistence is disabled. If there are N CP members in CP Subsystem, HazelcastInstance.shutdown() can be called on N-2 CP members concurrently. Once these N-2 CP members complete their shutdown, the remaining 2 CP members must be shut down serially. Even though the shutdown API can be called concurrently on multiple CP members, since the METADATA CP group handles shutdown requests serially, it would be simpler to shut down CP members one by one, by calling HazelcastInstance.shutdown() on the next CP member once the current CP member completes its shutdown. This rule does not apply when CP Subsystem Persistence is enabled so you can shut down your CP members concurrently if you enabled CP Subsystem Persistence. Please see CPSubsystem to learn more about the shut-down behaviour of CP members. It is enough for users to recall this rule while shutting down CP members when CP Subsystem Persistence is disabled. Interested users can read the rest of this paragraph to learn the reasoning behind this rule. Each shutdown request internally requires a Raft commit to the METADATA CP group when CP Subsystem Persistence is disabled. A CP member proceeds to shutdown after it receives a response of this commit. To be able to perform a Raft commit, the METADATA CP group must have its majority up and running. When only 2 CP members are left after graceful shutdowns, the majority of the METADATA CP group becomes 2. If the last 2 CP members shut down concurrently, one of them is likely to perform its Raft commit faster than the other one and leave the cluster before the other CP member completes its Raft commit. In this case, the last CP member waits for a response of its commit attempt on the METADATA CP group, and times out eventually. This situation causes an unnecessary delay on shutdown process of the last CP member. On the other hand, when the last 2 CP members shut down serially, the N-1th member receives the response of its commit after its shutdown request is committed also on the last CP member. Then, the last CP member checks its local data to notice that it is the last CP member alive, and proceeds its shutdown without attempting a Raft commit on the METADATA CP group.

CP Subsystem's fault tolerance capabilities are summarized below. For the sake of simplicity, let's assume that both the CP member count and CP group size configurations are configured as the same and we use only the DEFAULT CP group. In the list below, "a permanent crash" means that a CP member either crashes while CP Subsystem Persistence is disabled, hence it cannot be recovered with its CP identity and data, or it crashes while CP Subsystem Persistence is enabled but its CP data cannot be recovered, for instance, due to a total server crash or a disk failure.

  • If a CP member leaves the Hazelcast cluster, it is not automatically removed from CP Subsystem because CP Subsystem cannot certainly determine if that member has actually crashed or just disconnected from the cluster. Therefore, absent CP members are still considered in majority calculations and cause a danger for the availability of CP Subsystem. If the user knows for sure that an absent CP member is crashed, she can remove that CP member from CP Subsystem via CPSubsystemManagementService.removeCPMember(UUID). This API call removes the given CP member from all CP groups and recalculates their majority values. If there is another available CP member in CP Subsystem, the removed CP member is replaced with that one, or the user can promote an AP member of the Hazelcast cluster to the CP role via CPSubsystemManagementService.promoteToCPMember().
  • There might be a small window of unavailability after a CP member crash even if the majority of CP members are still online. For instance, if a crashed CP member is the Raft leader for some CP groups, those CP groups run a new leader election round to elect a new leader among remaining CP group members. CP Subsystem API calls that internally hit those CP groups are retried until they have new Raft leaders. If a failed CP member has the Raft follower role, it causes a very minimal disruption since Raft leaders are still able to replicate and commit operations with the majority of their CP group members.
  • If a crashed CP member is restarted after it is removed from CP Subsystem, its behaviour depends on if CP Subsystem Persistence is enabled or disabled. If CP Subsystem Persistence is enabled, a restarted CP member is not able to restore its CP data from disk because after it joins back to the cluster it notices that it is no longer a CP member. Because of that, it fails its startup process and prints an error message. The only thing to do in this case is manually delete its CP persistence directory since its data is no longer useful. On the other hand, if CP Subsystem Persistence is disabled, a failed CP member cannot remember anything related to its previous CP identity, hence it restarts as a new AP member.
  • A CP member can be encounter a network issue and disconnect from the cluster. If it is removed from CP Subsystem by the user even though this CP member is actually alive but only disconnected, this CP member should be terminated to prevent any accidental communication with the other CP members in CP Subsystem.
  • If a network partition occurs, behaviour of CP Subsystem depends on how CP members are divided in different sides of the network partition and to which sides Hazelcast clients are connected. Each CP group remains available on the side that contains the majority of its CP members. If a Raft leader falls into the minority side, its CP group elects a new Raft leader on the other side and callers that are talking to the majority side continue to make successful API calls on CP Subsystem. However, callers that are talking to the minority side fail with operation timeouts. When the network problem is resolved, CP members reconnect to each other and CP groups continue their operation normally.
  • CP Subsystem can tolerate failure of the minority of CP members (less than N / 2 + 1) for availability. If N / 2 + 1 or more CP members crash, CP Subsystem loses its availability. If CP Subsystem Persistence is enabled and the majority of CP members become online by successfully restarting some of failed CP members, CP Subsystem regains its availability back. Otherwise, it means that CP Subsystem has lost its majority irrevocably. In this case, the only solution is to wipe-out the whole CP Subsystem state by performing a force-reset via CPSubsystemManagementService.reset().

When CPSubsystemConfig.getCPMemberCount() is greater than CPSubsystemConfig.getGroupSize(), CP groups are formed by selecting a subset of CP members. In this case, each CP group can have a different set of CP members, therefore different fault-tolerance and availability conditions. In the following list, CP Subsystem's additional fault tolerance capabilities are discussed for this configuration case.

  • When the majority of a non-METADATA CP group permanently crash, that CP group cannot make progress anymore, even though other CP groups in CP Subsystem are running fine. Even a new CP member cannot join to this CP group, because membership changes also go through the Raft consensus algorithm. For this reason, the only option is to force-destroy this CP group via CPSubsystemManagementService.forceDestroyCPGroup(String). When this API is called, the CP group is terminated non-gracefully without the Raft mechanics. After this API call, all existing CP data structure proxies that talk to this CP group fail with CPGroupDestroyedException. However, if a new proxy is created afterwards, then this CP group is re-created from scratch with a new set of CP members. Losing majority of a non-METADATA CP group can be likened to partition-loss scenario of AP Hazelcast. Please note that non-METADATA CP groups that have lost their majority must be force-destroyed immediately, because they can block the METADATA CP group to perform membership changes on CP Subsystem.
  • If the majority of the METADATA CP group permanently crash, unfortunately it is equivalent to the permanent crash of the majority CP members of the whole CP Subsystem, even though other CP groups are running fine. In fact, existing CP groups continue serving to incoming requests, but since the METADATA CP group is not available anymore, no management tasks can be performed on CP Subsystem. For instance, a new CP group cannot be created. The only solution is to perform a force-reset which wipes-out the whole CP Subsystem state via CPSubsystemManagementService.reset().
See Also:
CPSubsystemConfig, CPMember, CPGroup, CPSession, CPSubsystemManagementService
  • Method Details

    • getAtomicLong

      @Nonnull IAtomicLong getAtomicLong​(@Nonnull String name)
      Returns a proxy for an IAtomicLong instance created on CP Subsystem. Hazelcast's IAtomicLong is a distributed version of java.util.concurrent.atomic.AtomicLong. If no group name is given within the "name" parameter, then the IAtomicLong instance will be created on the DEFAULT CP group. If a group name is given, like .getAtomicLong("myLong@group1"), the given group will be initialized first, if not initialized already, and then the IAtomicLong instance will be created on this group. Returned IAtomicLong instance offers linearizability and behaves as a CP register. When a network partition occurs, proxies that exist on the minority side of its CP group lose availability.

      Each call of this method performs a commit to the METADATA CP group. Hence, callers should cache the returned proxy.

      Parameters:
      name - name of the IAtomicLong proxy
      Returns:
      IAtomicLong proxy for the given name
      Throws:
      HazelcastException - if CP Subsystem is not enabled
    • getAtomicReference

      @Nonnull <E> IAtomicReference<E> getAtomicReference​(@Nonnull String name)
      Returns a proxy for an IAtomicReference instance created on CP Subsystem. Hazelcast's IAtomicReference is a distributed version of java.util.concurrent.atomic.AtomicLong. If no group name is given within the "name" parameter, then the IAtomicReference instance will be created on the DEFAULT CP group. If a group name is given, like .getAtomicReference("myRef@group1"), the given group will be initialized first, if not initialized already, and then the IAtomicReference instance will be created on this group. Returned IAtomicReference instance offers linearizability and behaves as a CP register. When a network partition occurs, proxies that exist on the minority side of its CP group lose availability.

      Each call of this method performs a commit to the METADATA CP group. Hence, callers should cache the returned proxy.

      Type Parameters:
      E - the type of object referred to by the reference
      Parameters:
      name - name of the IAtomicReference proxy
      Returns:
      IAtomicReference proxy for the given name
      Throws:
      HazelcastException - if CP Subsystem is not enabled
    • getCountDownLatch

      @Nonnull ICountDownLatch getCountDownLatch​(@Nonnull String name)
      Returns a proxy for an ICountDownLatch instance created on CP Subsystem. Hazelcast's ICountDownLatch is a distributed version of java.util.concurrent.CountDownLatch. If no group name is given within the "name" parameter, then the ICountDownLatch instance will be created on the DEFAULT CP group. If a group name is given, like .getCountDownLatch("myLatch@group1"), the given group will be initialized first, if not initialized already, and then the ICountDownLatch instance will be created on this group. Returned ICountDownLatch instance offers linearizability. When a network partition occurs, proxies that exist on the minority side of its CP group lose availability.

      Each call of this method performs a commit to the METADATA CP group. Hence, callers should cache the returned proxy.

      Parameters:
      name - name of the ICountDownLatch proxy
      Returns:
      ICountDownLatch proxy for the given name
      Throws:
      HazelcastException - if CP Subsystem is not enabled
    • getLock

      @Nonnull FencedLock getLock​(@Nonnull String name)
      Returns a proxy for an FencedLock instance created on CP Subsystem. Hazelcast's FencedLock is a distributed version of java.util.concurrent.locks.Lock. If no group name is given within the "name" parameter, then the FencedLock instance will be created on the DEFAULT CP group. If a group name is given, like .getLock("myLock@group1"), the given group will be initialized first, if not initialized already, and then the FencedLock instance will be created on this group. Returned FencedLock instance offers linearizability. When a network partition occurs, proxies that exist on the minority side of its CP group lose availability.

      Each call of this method performs a commit to the METADATA CP group. Hence, callers should cache the returned proxy.

      Parameters:
      name - name of the FencedLock proxy
      Returns:
      FencedLock proxy for the given name
      Throws:
      HazelcastException - if CP Subsystem is not enabled
      See Also:
      FencedLockConfig
    • getSemaphore

      @Nonnull ISemaphore getSemaphore​(@Nonnull String name)
      Returns a proxy for an ISemaphore instance created on CP Subsystem. Hazelcast's ISemaphore is a distributed version of java.util.concurrent.Semaphore. If no group name is given within the "name" parameter, then the ISemaphore instance will be created on the DEFAULT CP group. If a group name is given, like .getSemaphore("mySemaphore@group1"), the given group will be initialized first, if not initialized already, and then the ISemaphore instance will be created on this group. Returned ISemaphore instance offers linearizability. When a network partition occurs, proxies that exist on the minority side of its CP group lose availability.

      Each call of this method performs a commit to the METADATA CP group. Hence, callers should cache the returned proxy.

      Parameters:
      name - name of the ISemaphore proxy
      Returns:
      ISemaphore proxy for the given name
      Throws:
      HazelcastException - if CP Subsystem is not enabled
      See Also:
      SemaphoreConfig
    • getLocalCPMember

      CPMember getLocalCPMember()
      Returns the local CP member if this Hazelcast member is part of CP Subsystem, returns null otherwise.

      This method is a shortcut for CPSubsystemManagementService.getLocalCPMember() method. Calling this method is equivalent to calling getCPSubsystemManagementService().getLocalCPMember().

      Returns:
      local CP member if available, null otherwise
      Throws:
      HazelcastException - if CP Subsystem is not enabled
      See Also:
      CPSubsystemManagementService.getLocalCPMember()
    • getCPSubsystemManagementService

      CPSubsystemManagementService getCPSubsystemManagementService()
      Returns the CPSubsystemManagementService of this Hazelcast instance. CPSubsystemManagementService offers APIs for managing CP members and CP groups.
      Returns:
      the CPSubsystemManagementService of this Hazelcast instance
    • getCPSessionManagementService

      CPSessionManagementService getCPSessionManagementService()
      Returns the CPSessionManagementService of this Hazelcast instance. CPSessionManagementService offers APIs for managing CP sessions.
      Returns:
      the CPSessionManagementService of this Hazelcast instance